↳
The hosts are on two different subnets. Replace one of the switches with a properly-configured router. Less
↳
the host which assign 192.168.100.5/30 and host 192.168.100.50/30 these subnet is not belong to same subnet Less
↳
The subnet being used only provides 2 useable address, .5 and .6 the .50 address is out of the range. If there are only switches and no router, swap out one switch with a router and re-configure the network addresses. Less
↳
Which topic are they asked for gd
↳
Sry to ask can I get ur mail id?
↳
They expect very strong communication skill for fresher
↳
Router create broadcast domains by breaking multiple network into broadcast domain. Router is a layer 3 device and it is used in forwarding packet to the next hop(or next destination). Switch is a layer 2 device that creates collision domains. By creating collision domains, data performance is improved as there is no contention(as seen in CSMA/CD in hubs) as each port has its own dedicated bandwidth. Less
↳
a switch is a computer networking device that connects devices together on a computer network, by using packet switching to receive, process and forward data to the destination device. Router routes data to different networks or between networks. Less
↳
1st - The router so multiple employees can use the resource 2nd - The unpleasant employee - because they usually are the ones tasked with the most work and may be a key employee, plus they cant do anything on their computer 3rd - The CEO, because you don't want to keep him waiting Then #4 your friend, because he would be able to understand and can use other resources (such as e-mail to a co-worker) in the meantime. Less
↳
This is a typical root cause corrective action question. The router is the culprit here of all the other issues, or at least could be. The CEO probably can't access his email due to no connectivity, as well as the employee not being able to log on and your friend not being able to print. Less
↳
it is a operating system. :)
↳
After you got selected did they asked you to pay any amount for training?
↳
No I didn’t but I did work with Windows Server 2008 R2.
↳
I have worked with windows server 2016.
↳
I couldn't remember the answer at the time, and told them such. They seemed happy that I was able to admit that instead of trying to BS my way through it. Less
↳
Static route configuration per global config: ip route Example : ip route 192.168.0.0 255.255.252.0 s0/0 where s0/0 is the egress interface number Less